Voodoo Tactical Phantom HK Gloves
- Injection-molded thermoplastic knuckle defense
- Padded palm and back of hand
- Reinforced in all high-wear areas
- Hook-and-loop wrist straps for snug fit
U.S. Military Surplus Hospital Tray Set
- U.S. military issue
- Made in USA
- High-impact plastic
- 6 slots for food / utensils
- Various colors (no choice)
- 14″ x 10″
U.S. Military Surplus Arctic Canteen with Cover
- U.S. Military issue
- 1-qt. Canteen is used
- New heavy canvas Cover with Alice clips
- High-impact plastic stopper
- New aluminum canteen cup
- Stainless steel liner and aluminum shell separated by an insulating chamber of air
- Rubber neck liner so lips never touch cold metal
- Made in the USA
Burris Eliminator® III Ballistic Laser Scope
Burris combined outstanding optics with pinpoint laser rangefinding and precise trajectory compensation in the sleek design of the Eliminator III Ballistic Laser Scope. Range your target and use the lighted aiming dot for a perfect hold over on your target at any magification. No other riflescope combines this level of quality, technology, accuracy, repeatability and effectiveness. With proper practice, this optical instrument will greatly increase the distance at which you can make an ethical shot. The scope comes with tables listing thousands of cartridges and the types of bullets in popular calibers from .17 Remington to .50 BMG made by most major ammunition manufacturers. First, decide if you want to work in meters or yards. Next, find your load on the provided tables or Burris’ Internet site and locate the corresponding drop number. Then program your drop number and ballistic coefficient into the Eliminator Laser Scope. The Eliminator III provides over 1,200 yds. of range compensation, increased magnification of 4X-16X power and accuracy at any magnification. The X96 reticle provides freatures no other scope can match. Provides not only the lighted aiming dot for your target range, but also windage reference dots for accurate shooting in a variety of wind conditions. Ergonomic activation buttons are shooter-friendly. Parallax adjustment from 50 yds. to infinity for precise bullet placement and optimum optical resolution. It’s waterproof, shockproof, fogproof and withstands the toughest hunting conditions.
Steiner Tactical Binoculars
- Unique range-calculating SUMR reticle on 10x42R model
- Ergonomically designed
- Fully multicoated lenses and nitrogen purged
- Waterproof and fogproof
- Rubberized armor coating
Developed as compact, roof-prism surveillance binoculars, the Steiner 10x42R Tactical Binoculars sport tactical application-specific features that make communications between the spotter and shooter seamless. Its SUMR (Steiner Universal Mil Reticle) is displayed on the right side and provides the user a quick reference for judging range. Ergonomically designed with the viewer’s comfort in mind, these binoculars have soft-rubber eyecups that can be folded to accommodate eyeglass wearers. Rubberized armor coating protects them from the harshest conditions. Checkered gripping surface with recessed thumb pits optimizes comfort for long-term viewing sessions. Nitrogen-purged and fully multicoated lenses combined with a shockproof and waterproof housing endure extreme field use. Central focus knob has aggressive ridges for a sure gripping surface and rapid adjustment. Attached objective lens covers protect the lenses from dirt and debris. Includes a custom molded rubber case.
Streamlight TLR-4 Light/Laser-Sight Combo
- Long-running, shockproof light
- 3-watt Luxeon LED
- Peak beam intensity of 110 lumens
- Rugged polymer and aluminum construction
- Mounts to Picatinny or side-mounting Glock rail
- Waterproof to 39″ for one hour
Lightweight tactical light/laser-sight combo. Long-running, shockproof light projects blinding illumination from a 3-watt Luxeon™ LED. Rugged polymer and aluminum construction. Mounts to Picatinny or side-mounting Glock rail. Waterproof to 39″ for one hour. Ambidextrous momentary or constant-on switch. Peak beam intensity of 110 lumens with optimal peripheral illumination. Runs up to 1-1/2 hours in light mode and up to 11 hours in laser-only mode on one 3-volt CR-2 lithium battery (included). Securely fits a range of firearms with included interchangeable keys.
Streamlight® TLR HL™ Rail-Mounted Tactical Lights
- C4 LED generates a whopping 800 lumens at peak intensity
- TLR-2 model includes integrated red laser for aiming accuracy
- Case made of 6000-series machined aircraft aluminum
- Ambidextrous, momentary/steady on/off switch
Incredibly bright, durable and easy to mount, the compact Streamlight TLR HL Rail-Mounted Tactical Lights illuminate any situation. C4® LED generates a whopping 800 lumens at peak intensity. Can run continuously up to 75 minutes with the two included 3-volt, CR-123A lithium batteries. Available in TLR-1 and TLR-2 models, the TLR-2 includes an integrated red laser for aiming accuracy, and windage and elevation adjustment screws. Screws are mounted in brass bushings for longevity and dependable zero retention. Both models attach to your weapon with a one-handed, snap-on rail clamp. Includes five interchangeable keys to fit a wide variety of weapons. Constructed of 6000-series machined aircraft aluminum with an anodized finish and a shock-mounted, impact-resistant lens. Laser housing consists of a high-impact, chemical resistant polymer.
Smith & Wesson Delta Force Light
- Durable impact- and water-resistant construction
- Long-lasting Cree XPL LED bulb boasts incredible brightness
- High, low, strobe and momentary on modes
- Picatinny rail mount for quick and easy gun mount
- Remote on/off button with hook-and-loop mounting straps
Smith & Wesson’s Delta Force Light boasts a durable impact- and water-resistant anodized aerospace aluminum construction that you can feel good about attaching to your weapon. Two CR-123 batteries (included) power the long-lasting Cree XPL LED bulb to provide exceptional brightness. High, low, strobe and momentary-on modes let you select the ideal light for each situation. Includes a Picatinny rail mount for quick and easy installation to your favorite firearm plus a remote on/off button with hook-and-loop mounting straps for easy access. Tailcap for momentary and on/off functions. Crenulated head is ideal for close-combat self-defense.
Glock Factory Magazines
- Glock factory replacement magazines
- Factory 10-round magazines for 10-round states
- Increase your handgun’s capacity
- Double-stack design
- Constructed of stiff metal encased in Glock polymer
- Viewing windows for each cartridge for visual confirmation
Increase the volume of your Glock pistol’s firepower by adding an extra magazine or two. Each factory magazine is built using a stiff metal tube encased in Glock’s proven-effective polymer to resist magazine deformation and make them amazingly durable. Rounds are arranged in a double-row column with a viewing window for each cartridge so you’ll always know exactly how many cartridges are in the magazine.
Smith & Wesson® Factory Magazines
-
- Magazines for your S&W semiautomatic pistols
- Direct from the manufacturer – not imitations
- Identical to magazines that come with new S&W guns
Extra magazines for your Smith & Wesson semiautomatic pistol direct from the manufacturer. These aren’t imitations or factory seconds. They are identical to the magazines that come with new Smith & Wesson firearms.
SIG Sauer® Factory Magazines
- Magazines for SIG Sauer semiautomatic pistols
- Direct from the manufacturer
- Built to exacting specifications
- Reliable performers
Extra magazines for your SIG Sauer semiautomatic pistol direct from the manufacturer. Built to the exacting specifications of your gun’s maker, these are identical to the magazines you receive with new SIG Sauer firearms. All magazines are metal.
Ruger® BX-25™ Magazine – Two-Pack
- Presents cartridges at a 30º angle, perfect the 10/22 rifle
- Constant-force stainless steel spring
- Self-lubricating anti-tilt follower
This genuine Ruger BX-25 25-round 10/22® Magazine is enhanced with high-performance features. Stainless steel feed lips present cartridges into the action at a 30º angle – precisely the angle the legendary 10/22 semiautomatic rifle prefers. For extra consistency, it has a constant-force stainless steel spring and a self-lubricating anti-tilt follower. Two-screw disassembly allows for easy cleaning. Works in any factory-original .22 LR 10/22 rifle, 77/22® rifle, SR-22® rifle and 22 Charger™ Pistol.